Descargar Imprimir esta página

Pairing; What Is Pairing; Procedures Of Pairing - Sony DR-BT30Q Manual De Instrucciones

Ocultar thumbs Ver también para DR-BT30Q:

Publicidad

Idiomas disponibles

Idiomas disponibles

Pairing

What is pairing?

BLUETOOTH devices need to be
"paired" with each other beforehand.
Once BLUETOOTH devices are
paired, there is no need for pairing
again, except in the following cases:
• Pairing information is deleted
after repair, etc.
• This unit is paired with 9 or more
devices.
This unit can be paired with up to
8 devices; if a new device is
paired after 8 devices have been
paired, the device whose latest
connection time is the oldest
among the 8 paired devices is
replaced by the new one.
• When recognition of the unit by
the device to be connected is
deleted.
• This unit is initialized.
All pairing information is deleted.

Procedures of pairing

1
Place the connecting
device within 1 m (3 ft)
of this unit.
2
Press and hold the
POWER button for
7 seconds or more to
standby for pairing
while the unit is turned
off.
Notes
• After about 3 seconds, power is
turned on and the indicator (blue)
and indicator (red) flash together
twice. Keep the button pressed
without releasing until both
indicators start flashing together,
then release the button. This unit
enters into pairing mode.
• If pairing is not established within
about 5 minutes, pairing mode will
be canceled and this unit will turn
off. In this case, start over from
step 1.
Continued
9
US

Publicidad

Capítulos

Solución de problemas

loading