English
Operating Procedure - RWT150AW
1. Press On/Off button to Power on the Machine
2. Selection of Cycles
• T urn the dial to the desired cycle.
3. Start/Pause
• I f "Start/Pause" button isn't pressed within 5 minutes after powering "On" the
unit will automatically switch off.
• T he washer will also turn off immediately after completion of the wash process.
• R egardless of setting, pressing the off button all programs will stop.
• T he washer has intelligent wash resumption (Cycle Reset). When power is
interrupted at the power source, the washer will resume running where it left off
when power is returned.
• P ress this button when you want the machine to start.
• D uring operation, press this button to pause and press it again to resume
operation.
Note: O pening the top lid will stop the machine except during water filling.
Normal Operating Sounds
The following sounds are normally heard during the operation of the washer:
• T umbling sounds: This is normal as the heavy wet clothes in the washer are
continuously being tossed around.
• Air rushing noise: This happens when the washer tub spins at very high RPM.
• Wash and Rinse cycles going on and off will also make clicking sounds.
14