Publicidad
Idiomas disponibles
Idiomas disponibles
6. Fractured bones.
7. Epiletic fits.
8. DO NOT USE during pregnancy.
ASSEMBLY INSTRUCTIONS.
Take the unit out of the box and place
it on the floor as shown in Fig.1.
The assistance of a second person
is advisable for the assembly work.
Make sure that all of the pieces are
there:
(A) Main body; (C1) Right pedal; (C2)
Left pedal; (B) Stabiliser bar; (B1) Rear
stabiliser bar; (D) Screw M-4x25; (E)
Grower
washer
combination
spanner
screw..
1.- FITTING THE
STABILISERS.
Take the stabilser (B) marked with the
letter (A) and place it at the front of the
unit marked with the letter (A), as
shoewn in Fig.2, insert the M-4x25
screws (D).
Next, take the rear stabiliser (B1)
marked with the letter (B), Fig.3, and
go through the same fitting procedure
as with the front stabiliser.
2 ATTACHING THE PEDALS.
Fit the right pedal (C1) onto the right
crank (R) as shown in Fig. 4. Screw
the pedal clockwise. Then fit the left
pedal (C2) onto the corresponding left
crank (L), this time screwing the pedal
countercklockwise.
M-4;
Pedal
(G)
Safety
Insert the safety screws (G) inside the
cranks and screw them tightly and
clockwise. Fig. 4.
MAINS CONNECTION.
Connect the unit to a plug provided of
a ground (220v). Put the switch (L) in
position [1] Fig.6.
REMOTE CONTROL.
Display indicator: Speed,
Time. Distance (Distance
traveled km) Calorie, Scan (The
random sample data display
speed, time, distance, calories).
1:
2:
button. (1-15 min).
3:
increasing speed (12 speed
levels).
14
Power
Time-Time selection
Speed-- Select key for
Publicidad
