Overview Of The Components - Clatronic DO 3204 Instrucciones De Servicio

Консервный ключ на батарейках CLATRONIC DO 3204
В интернет-магазине www.clatronic-shop.com.ua
Symbols in these Instructions for Use
Important information for your safety is specially marked. It is essential to comply with these
instructions in order to avoid accidents and prevent damage to the machine:
WARNING:
This warns you of dangers to your health and indicates possible injury risks.
CAUTION: This refers to possible hazards to the machine or other objects.
NOTE: This highlights tips and information.
1 Cutting lever
2 Charging contacts
3 Battery compartment
The can opener can be used to open different shaped cans quickly and easily.
• Round cans are the most suitable.
Wall Installation
The charging station can also be installed on the wall. Please remember however that there
must be an electric socket close by.
• To do so, measure the distance between the recesses on the back and drill two holes at
this distance for the rawlplugs.
Please ensure beforehand that you will not be damaging any electrical wiring or pipes
hidden in the wall!
Preliminary Cleaning
Before using the device for the fi rst time you should clean it in order to remove any residues
from the production process. Please follow the instructions contained in the „Cleaning"
section.
05-DO 3204.indd 41 05-DO 3204.indd 41

Overview of the Components

Instructions for Use
WARNING: Do not open any cans that are under pressure!
CAUTION:
4 Blade
5 Toothed wheel
6 Lid magnet
GB
41
17.09.2007 15:36:04 Uhr 17.09.2007 15:36:04 Uhr