Publicidad
Idiomas disponibles
Idiomas disponibles
AF
This option can be used to manage the autofocus function of the camera.
Option
AF MODE
ONE SHOT AF
TDN AF
LENS INIT
POWER MODE
CLEANING THE DEVICE
•
Rub delicately with a dry cloth to remove dust and dirt.
•
Dip the cloth in neutral detergent if dirt cannot be eliminated with a dry cloth alone.
•
Do not use volatile liquids (such as petrol, alcohol, solvents, etc.) or chemically treated clothes to
clean the device to prevent deformation, deterioration or scratches to the paint finish.
30
Value
SEMI ÷ AUTO ÷
MANUAL ÷ OFF
/
ON ÷ OFF
/
SAVE POSI ÷ OFF
÷ WIDE
This function is used to customise the camera focusing
mode. Possible options are:
SEMI: focusing is performed only after the zooming
operations are finished.
AUTO: focusing is adjusted automatically.
MANUAL: focusing is adjusted manually.
OFF: focusing and zoom are deactivated. Activate this
option after having adjusted focus and zoom as required.
Function not available.
This function, when activate, allows automatic focus
adjustment at each day->night or night->day switch.
This re-initialises the optics and obtained optical
calibration. To be performed when the camera is installed
for the first time and in case of movements with
consequent change of the framed picture.
IMPORTANT: do not use with AF MODE equal to OFF.
This is used to adjust the zoom whenever the camera is
switched back on.
SAVE POSI: this holds the zoom position set before the
camera was switched off.
OFF: do not save the settings stored before switch-off.
WIDE: the camera is switched on in Wide mode.
Description
DS1092-242
Publicidad
