Exposure - Urmet 1092/274H Manual De Usuario

MENU USE
The camera ref. 1092/274H uses a multi-level menu that allows to enable/disable or change camera
settings.
Press the adjustment button on the micro camera connection wire while the camera is on and operating to
use the button and access the main menu.
Important note:

The OSD menu activation button is joystick type; it
is used to make selection operations easier.
MENUS SYSTEM DESCRIPTION
Once the menu access command has been performed pressing the central button, the access first screen
will be displayed.
Displayed items can be selected by pressing the down button.
Once the item has been selected, the parameter can be changed using the right button and choosing
among the available options, that can be displayed by pressing repeatedly the button.
By selecting the item associated to the symbols
where other changes can be performed.
To quit the menu or the submenu and confirm the executed changes, select the item EXIT SAVE&END
and press the central button.
To reactivate the default values select the item EXIT RESET and press the central button.
MAIN MENU
SETUP (DEFAULT VALUES)
LENS

EXPOSURE

BACKLIGHT
WHITE BAL.
DAY&NIGHT
NR
SPECIAL
ADJUST
EXIT
Note
With default values, the camera uses a brightness adjustment that is not suitable for all installations.
Change BRIGHTNESS in the menu EXPOSURE (see below), if necessary.
DS 1092-219A
or
MANUAL
OFF
ATW
EXT
SAVE&END
it is possible to access to the next submenu,
21