Getting Started; Activate The Monitor; Pairing The Camera And Monitor - Furrion 5 Vision S Manual De Instrucciones

Getting Started

The camera and monitor need to be paired
the first time you are using your Vision S
Camera System.
NOTE: Ensure both the camera and monitor
have power supplied during Pairing and
setting processes. (The vehicle may need to be
running.)

Activate the Monitor

In off mode, press the Menu button on the
right of the monitor to turn on the monitor
and enter the menu setting page. In on mode,
press the Menu button to activate the menu
setting page.
There are four options that allow you to set
the wireless vehicle rear observation system
before operating. Touch one of the four
options to enter the setting page or press
return to previous page.

Pairing the Camera and Monitor

1. Touch PAIRING on screen. The PAIRING
will be highlighted in red once selected
and enter the submenu automatically.
2. Select the desired camera you are going
to pair. Press "MONITOR PAIRING" button
at the bottom of the selected camera for 3
to
seconds to pair.
NOTE: The monitor can only pair to one
camera for each channel and a total of
four cameras are supported.
9