Power Supply; Camera; Options - Extel LOONA 2 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
b. Power supply
• Adaptor 100-240 V~, 50/60Hz ; 17 V , 1.5A
If the power supply cable has to be cut, ensure that the colour coding
of the wires is maintained when reconnecting.
c. Camera
(PL LOONA 2)
• Reference: 820263
• C-MOS colour video camera: 648 x 488
• Viewing angle: 76° / Rotating lens
• Sensitivity: 3 Lux
• Operating temperature (approximate): -10°C to +45°C.
• Protection index: IP44
• Measurements with shield (mm): 160 x 120 x 30

8. OPTIONS

• All Extel electric catches
• All Extel electric locks
• All Extel mechanisms
• Power supply MODULO
9. TECHNICAL ASSISTANCE - GUARANTEE
Problems
• The monitor doesn't light up
• Poor image and/or sound
• Image too bright
• Blue screen, no chime
If necessary, our technical website is at your disposal www.cfi-extel.com
HOTLINE : 0892-35-00-69
Last version of the dowloadable manual in color on :
GB5
Possible Causes
• No power is reaching the
monitor
• Installation location
• Position of the video camera
• Installation
www.cfi-extel.com
CFI EXTEL LOONA
Remedies
• Check that the adaptor plug is correctly
pushed home.
• Check that the cables used are the correct
thickness and that the videophone connec-
tion cables are not in the same cable sheath
as 230 V cables.
• Do not point the video camera directly
at the sun or at reflecting surfaces.
• The wires connecting the monitor and
the street unit (1 and 2) have been swap-
ped.
- 12/2011
2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hd-2429

Tabla de contenido