Maintenance; Troubleshooting - Skil PWRCORE 12 Manual Del Propietário

Ocultar thumbs Ver también para PWRCORE 12:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MAINTENANCE

Service
WARNING
cause serious hazard .
Service Center or Authorized SKIL Service Station.
General Maintenance
WARNING
Periodically inspect the entire product for damaged, missing, or loose parts such as screws,
nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product
until all missing or damaged parts are replaced. Please contact customer service or an
authorized service center for assistance.
WARNING
Cleaning
WARNING
attempt to clean by inserting pointed objects through openings.
WARNING
ammonia and household detergents that contain ammonia.
Storage
Store the tool indoors in a place that is inaccessible to children. Keep it away from corrosive
agents.

TROUBLESHOOTING

Problem
Battery pack will
not charge.
Preventive maintenance performed by unauthorized personnel may
result in misplacing of internal wires and components which could
We recommend that all tool service be performed by a SKIL Factory
When servicing, use only identical replacement parts . Use of any
other parts could create a hazard or cause product damage .
To avoid serious personal injury, always remove the battery pack
from the charger/tool when cleaning or performing any maintenance .
The tool may be cleaned most effectively with compressed dry air.
wear safety goggles when cleaning tools with compressed air .
Certain cleaning agents and solvents damage plastic parts .
these are: gasoline, carbon tetrachloride, chlorinated cleaning solvents,
Cause
1. Charger is not plugged into a
functioning outlet.
2. Battery pack is not completely
inserted into the charger.
3. Bad contacts
4. Battery is over- or under-
temperature.
5. Battery pack is damaged.
6. Charger is damaged.
Remedy
1. Confirm charger is plugged into a
functioning outlet.
2. Confirm battery pack is inserted into
charger completely.
3. Clean the contacts of the charger or
battery packs.
4. Cool the battery if too hot. Place the
battery indoors if too cold.
5. Have the battery pack serviced by an
Authorized SKIL Service Station.
6. Have the charger serviced by an
Authorized SKIL Service Station.
Always
Do not
Some of
15

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Qc535701

Tabla de contenido