Other Recording Functions; About The Recording Modes; More About "New Song" Mode; Solo Recording Mode - Roland KR103 Manual Del Usuario

KR103 Digital Intelligent Piano
Recording your music

Other recording functions

The KR103's 16-track Recorder can be used in several
ways. Let us therefore have a look at the other
recording modes.

About the recording modes

IModes
The KR103 provides one mode for recording new
music, and two for adding parts or correcting pas-
sages of existing music:
Recording a new song:
New Song In this mode, you can record everything you and
the KR103 can play simultaneously:
• Arranger (accompaniment).
• Keyboard parts (Upper and Layer or Lower).
• Your performance in Piano mode.
Adding parts to an existing song
Solo In this mode, you can record onto one track at a
time. The track can be freely selected.
Punch I/O This mode allows you to re-record a short section
of an otherwise perfect part.
Note: Each time you select "New Song" mode, the data in
the USR memory are erased. Also note that "New Song"
mode is selected whenever you press the [REC¥∏] button.
Don't forget to select another mode before you start
recording if the previously recorded parts must not be
erased.
IRecorder memory
The KR103 provides one "live" song memory, which
can contain one song at a time. After completing a
song, you should save it (see p. 52).
Playing back a Standard MIDI File erases the song in
the KR103's USR memory. You could take advantage
of this system to "load" a previously recorded song
and to replace one of its parts with your own rendi-
tion, or to add new parts.

More about "New Song" mode

In addition to what you learned on p. 28, here are a few
considerations:
After pressing the [REC¥∏] button, the 16 track and
[RECORD∏] icons start flashing to signal that all 16
tracks are available for recording.
NewSong
30
120 001
=
ORCHESTRATOR BEAT
FULL
BAND
INTRO
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
Here is what the tracks correspond to (after recording
a song with Arranger backing):
Whole
1
Arranger bass
2
Accomp 2
3
k Upper
4
Accomp 3
5
k Layer
6
Accomp 4
7
8 Accomp 5
(*) If you assign a Drum Set to the Upper part. In that case, track 4
is not used.
For your convenience, the Keyboard parts are flagged
with a "k" symbol in the above graphic.
Parts you do not hear during recording are not
recorded. The track icons [1]~[16] thus do not show
you what will be recorded, but rather what can be
recorded.
Note: If you assign a Drum Set to the Upper part, your drum
performance is recorded onto track 16.

Solo recording mode

This mode can be used to add new parts to an already
existing song (which you need to play back at least
once in order to load its data into the USR memory).
This approach furthermore allows you to replace an
existing part (the bass line, for example) with your own
version.
(1) Press the [REC¥∏] button (its indicator flashes).
Record/Playback
Menu Rhythm Whole
R 1
Reset Play/Stop Rec
The display now looks as follows:
Solo
The icon and the icon of the first empty
RECORD
track flash. The indicator of the Recording/Playback
button that corresponds to the first empty track also
flashes. You could therefore record a new part
straight away. (If all tracks already contain data, track
1 is selected.)
(2) Use the [+][–] buttons to select the track you wish
to record to.
You can only select one track at a time (hence the
name "Solo"). If you select a track that already con-
tains data, your new version will overwrite the exist-
ing one.
(3) If necessary, assign the desired Tone to the part
you are about to record (see p. 35).
If you select track [10], you can select Drum Sets
rather than Tones. Track 10 is reserved for drum
parts.
Accomp 6
9
Arranger drums
10
k Lower
11
12
Accomp 1
13
14
Melody Intell. (see p. 34)
15
16 ( k Upper*)
Bass
Accomp Lower Upper
2 3 4
Bwd Fwd
120
=