Rear Panel - Roland KR103 Manual Del Usuario

KR103 Digital Intelligent Piano
Panel descriptions
V
Tone
Guitar Sax Others
Piano Organ Bass Strings Brass Drums/Sfx
Piano Arranger Split Layer
Z a
One Touch Program
Lower
V [Tone] buttons
Press one of these buttons and use [+][–] or [√][®] to
assign a sound ("Tone") or Drum Set to the Upper,
Layer or Lower part. See page 35.
W [Disk] button
Press this button to access the Disk functions. They
are used for saving data to disk, and managing floppy
disks. See p. 52.
X Record/Playback section
The buttons in this section allow you to control song
recording and playback as well as to select the tracks
you want to hear or record. See page 23 and 28.
Y Disk drive
Used for playing back material recorded on floppy
disks, or saving and loading songs or settings to/from
disk.

Rear panel

Expression
A B
A USB port
Use a USB cable to connect this port to your com-
puter. This allows you to send and receive MIDI data
to/from your computer. While a cable is connected to
this port, the MIDI In and Out sockets cannot be used.
B Expression socket
This is where you can connect an optional EV-5 or
EV-7 expression pedal that can be used as a volume
pedal.
C Pedal socket
This is where you can connect the pedal cable of the
supplied stand (KRS103). The stand comes with three
pedals.
10
W X
Record/Playback
Disk Menu Rhythm Whole
R 1
Melody
Intelligence
b
Reset Play/Stop Rec
Pedal
C
Bass
Accomp Lower Upper
2 3 4
Bwd Fwd
Z One Touch Program [Piano]/[Arranger] buttons
These buttons allow you to instantly recall the appro-
priate settings for the music you want to play.
a [Split] and [Layer] buttons
These buttons have several functions:
By pressing [Split], you assign the Upper part to the
right half of the keyboard, and the KR103's Arranger
to the left. By pressing it together with the [Layer]
button, you switch on a second part (called "Lower")
that can be played via the left half. See page 21.
b [Melody Intelligence] button
This button allows you to switch the Melody Intelli-
gence function on/off. Melody Intelligence is a func-
tion that adds a harmony part to your melody play-
ing. See p. 34.
Out In
MIDI
D
D MIDI sockets (Out, In)
Use these connectors to exchange MIDI data with
external MIDI devices. Note that these sockets are not
available while a cable is connected to the USB
socket.
E INPUT R/L (MONO) sockets
This is where you can connect the audio outputs of
another MIDI instrument, a CD or cassette player, etc.
The signals of that audio source will be amplified and
mixed with the KR103's own audio signals.
F OUTPUT R/L (MONO) sockets
These sockets allow you to connect the KR103 to
your HiFi amplifier, a mixer, a cassette deck, a key-
board amplifier, etc. If the external amplifier is mono,
be sure to connect it to the OUTPUT L/MONO socket.
Y
Stereo Stereo
R L (Mono) R L (Mono)
Input Output
E F