Cook Time - Bosch NET8066UC Manual Del Usario

Ocultar thumbs Ver también para NET8066UC:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

bacon
eggs
fish
pancakes
Deep fat frying** (in 1-2 qt. oil)
deepfrozen foods, e.g. chicken nuggets (0.5 lb per serving)
other e.g. doughnuts (0.5 lb per serving)
* ongoing cooking without lid
** without lid
*** turn several times

Cook time

You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
CAUTION
9
When using the timer, always keep an eye on the
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
This function should not be used for long periods
of time, especially at high heat settings.
Make sure the cooktop is turned off with the main
power switch after each use.
Setting the cook time
Select the desired element and power level.
1.
Touch the Timer key. The indicators
2.
up and timer value
‹‹
4
5
6
and min light
x
is indicated in the timer display.
min
Timer
7
8
9
Within the next 10 seconds set the desired cook time
3.
using the number keys.
The timer starts to count down. If you have set a cook
time for several elements, the timer display indicates
the remaining time for the selected element.
4
5
6
Once the cook time has elapsed
When the cook time has elapsed, the cooking zone
turnes off. You will hear a beep and on the indicator,
will light up for 10 seconds. The
indicator. The indicators go out and the audible signal
ceases.
Changing cook time
Touch the Timer key until the
the desired element. Adjust the cooking time using the
number keys.
Cancelling cook time
Touch the Timer key until the
the desired element. Then set the timer value to
the number keys. The
x
Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the chapter "Basic settings".
Note: The cook time can be changed or cancelled for
any element:
Touch the Timer key several times until the
of the desired element lights up. Adjust the cook time
using the number keys, or deactivate it by setting the the
timer value to
.
Power levels
6 - 7
5 - 6
5 - 6
5. - 6.
8 - 9
4. - 5.
min
Timer
7
8
9
lights up. Touch any
x
indicator lights up on
x
indicator lights up on
x
‹‹
indicator goes out.
x
indicator
‹‹
with
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Net8066suc

Tabla de contenido