Accessories; Standard Accessories; Optional Accessories - Metabo HPT H 45MEY Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING
ALWAYS use Only authorized metabo HPT replacement parts and accessories. NEVER use replacement
parts or accessories which are not intended for use with this tool. Contact metabo HPT if you are not sure
whether it is safe to use a particular replacement part or accessory with your tool.
The use of any other attachment or accessory can be dangerous and could cause injury or mechanical
damage.
NOTE:
Accessories are subject to change without any obligation on the part of the metabo HPT.

STANDARD ACCESSORIES

(1) Bull Point (SDS max shank) (Code No. 313471)......1
(2) Case (Code No. 337594) ........................................1
(3) Side Handle (Code No. 333199) .............................1
OPTIONAL ACCESSORIES ......sold
separately
Demolitioning
(1) Bull Point (SDS max shank type)
Overall Length 11-1/32" (280 mm) 15-3/4" (400 mm)
Code No.
313471
Groove digging and edging
(1) Cold chisel (SDS max shank type)
Overall Length 11-1/32" (280 mm) 15-3/4" (400 mm)
Code No.
313473
Asphalt Cutting
(1) Cutter (SDS max shank type)
Overall Length
Code No.

ACCESSORIES

313472
313474
15-3/4" (400 mm)
313475
Scooping Work
(1) Scoop (SDS max shank type)
Overall Length
Code No.
Surface Roughing
+
(1) Bushing Tool
(Code No. 313477)
Tamping
+
(1) Rammer
(Code No. 313478)
Hammer Grease A
30 g (in a tube) (Code No. 981840)
70 g (in a tube) (Code No. 308471)
NOTE:
Specifi cations are subject to change without any obligation
on the part of the metabo HPT.
English
15-3/4" (400 mm)
313476
(2) Shank
(Code No. 313479)
(2) Shank
(Code No. 313479)
11

Publicidad

Tabla de contenido
loading

Tabla de contenido