Technics SU-R1A Instrucciones De Funcionamiento página 12

AC mains lead connection
Connect only after all other connections are completed.
This unit
(rear)
∫ To disconnect the AC mains lead from this unit
Pull out the AC mains lead while pressing the top and bottom sides of the connector.
Measuring the characteristics of the amplifier and correcting its
output
If the SE-R1 is connected to this unit via the system control function, you can operate using the remote control of this unit.
Press and hold [LAPC] until the LAPC indicator on the SE-R1 starts to blink.
≥ The SE-R1 will start measuring the characteristics of the amplifier if it is connected to the speakers.
≥ For information on the operations of the SE-R1, please also refer to its operating instructions.
12
(12)
DO DO NOT
TENTATIVE
AC mains lead
(supplied)
To a household mains socket


