Control Reference Guide - Technics SU-R1A Instrucciones De Funcionamiento

Reproductor audio en red con pre-amplificador
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 108

Control reference guide

This unit
∫ Front
   
1 Unit on/off button [
Use this button to turn the unit on and off.
[
] (off): The unit is off.
[
] (on): The unit is on.
≥ The unit is still using a small amount of power in off mode. Off
mode uses less power. (
2 Port for iPhone/iPad/iPod and USB devices
(
DC 5 V 2.1 A) (
16, 17)
3 Power indicator
The colour of the indicator changes according to the
status of this unit.
Blue
The unit is on.
Red
The unit is in standby mode.
4 Remote control signal sensor
Distance: Within approx. 7 m directly in front
Angle: Approx. 30o left and right
5 Volume knob
Adjust the volume of the headphones or the SE-R1. (
≥ It is not possible to adjust the volume of devices connected to
the analogue or digital audio output terminals.
≥ The speed at which the volume is adjusted varies depending
on how fast you turn the knob.
6 Display
≥ The input source, playback status and other information
are displayed. For more details, check the support site
below as well as these operating instructions.
www.technics.com/support/
7 Basic control buttons
1/;
Play/Pause
RETURN
Return to the previous display
≥ Press and hold [RETURN] on the unit to display the HOME menu. ( 13)
8 Headphones jack
For connecting a headphone plug.
≥ Excessive sound pressure from earphones and headphones
can cause hearing loss.
≥ Listening at full volume for long periods may damage the user's ears.
9 Multi-control knob (
13)
≥ Turn this knob clockwise or anticlockwise to switch the input
source, scroll through items, and skip during playback.
≥ To set an item, press the knob; to enter the menu
screen, press and hold it.
]
26)
13)
∫ Rear
: Analogue audio output terminals [UNBALANCED]
(
10)
; Analogue audio input terminals [LINE1]/[LINE2]
(
10)
< System terminal [Technics Digital Link OUT] (
= Product identification marking
The model number is indicated.
> Analogue audio output terminal [BALANCED] (
? Digital audio output terminal [AES/EBU] (
@ Digital audio output terminal [COAXIAL] (
A Digital audio output terminal [OPTICAL] (
B Digital audio input terminal [AES/EBU] (
C Digital audio input terminals
[COAXIAL1]/[COAXIAL2]/[COAXIAL3] (
D Digital audio input terminal [OPTICAL] (
E LAN port [LAN] (
14)
F Digital audio input terminal [PC] (
For connecting to a PC, etc.
G AC IN terminal [AC IN T] (
Class II equipment
(The construction of the product is double-insulated.)
I On
Í Standby
9)
10)
11)
11)
11)
11)
11)
11)
19)
) (
12)
(7)
7

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido