Steren AMP-012 Manual De Instrucciones página 16

5.- Turn on the amplifier.
6. - Turn on the wireless microphone then begin speaking and adjust the volume level according your needs.
7.- When not using the devices turn off the amplifier and turn off the microphone and remove the
microphone´s battery and disconnect the amplifier.
HOW TO USE THE MP3 PLAYER
Your new amplifier includes an SD card, where you can store MP3 files and play them in the
amplifier.
1.- Check the amplifier is off.
2.- Place an SD card as shown.
3.- Turn the amplifier on.
4.- Press Play to start playing, the indicator LED will flash.
5.- After using the SD card, please turn the amplifier off and remove the card.
SPECIFICATIONS
Input: 110-240V~ 50/60Hz 50W
Battery: 12V - - - 1.2Ah
Power output: 35W
Frequency response: 50-12000Hz
Carrier frequency: 160-270 MHz
Sensitivity: 10dBµV
Product design and specifications are subject to change, without notice.
16
RMS
Microphone
Input: 9V - - - (square battery)
Frequency response: 40Hz to 16kHz
Total harmonic distortion (THD): <0.5%
Nominal consumption: 432 Wh/day
Stand-by power consumption: 240 Wh/day