Benelli 302S Manual Del Propietário página 131

For your safety – pre-operation checks
ITEM
Brake and clutch
levers
EN
Sidestand
4
Chassis fasteners
Instruments,
lights, signals
and switches
Sidestand switch
CHECKS
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
•
Make sure that operation is smooth.
•
Lubricate pivots if necessary.
•
Make sure that all nuts, bolts and screws are properly tightened.
•
Tighten if necessary.
•
Check operation.
• Correct if necessary.
•
Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Benelli dealer check vehicle.
4 - 3