☞
The device and cuff are not water resistant. Prevent rain, sweat
and water from soiling the device and cuff.
☞
Measurements may be distorted if the device is used close to
televisions, microwave ovens, cellular telephones, X-ray or other
devices with strong electrical fields.
☞
When using the device, confirm that the device is clean.
☞
Used equipment, parts and batteries are not treated as ordinary
household waste, and must be disposed of according to the
applicable local regulations.
☞
When the AC adapter is used, make sure that the AC adapter
can be readily removed from the electrical outlet when
necessary.
☞
Do not modify the device. It may cause accidents or damage to
the device.
☞
To measure blood pressure, the arm must be squeezed by the
cuff hard enough to temporarily stop blood flow through the
artery. This may cause pain, numbness or a temporary red mark
to the arm. This condition will appear especially when
measurement is repeated successively. Any pain, numbness, or
red marks will disappear with time.
☞
Take care to avoid accidental strangulation of babies or infants with
the hose.
☞
Do not twist the air hose during measurement. This may cause
injury due to continuous cuff pressure.
☞
Wireless communication devices, such as home networking
devices, mobile phones, cordless phones and their base stations,
walkie-talkies can affect this blood pressure monitor. Therefore, a
minimum distance of 11 feet (3.3 meters) should be kept from such
devices.
PRECAUTIONS
E-2