Preparation For Use - Breitling SUPEROCEAN HÉRITAGE II CHRONOGRAPHE 46 Manual Del Usuario

PREPARATION FOR USE

WINDING – TIME-SETTING
NB: mechanical watches with a date indicator window are
equipped with a complex mechanism that is set into motion
between 8 pm and 3 am. Its is therefore vital to avoid adjusting
the calendar or moving the time backwards during this period.
1. Unscrew the water-resistant crown anti-clockwise.
Wind the watch through approximately 40 clockwise
turns of the crown.
2. Pull the crown out to position 2, and turn it clockwise
to adjust the calendar to the day prior to the activation
date.
3. Pull the crown out to position 3. Turn the hands past
midnight so as to make the calendar jump to the cor-
rect date. Then adjust the hour and minute.
4. Push the crown back to position 1. Press it gently, turn-
ing it gently clockwise, then tighten it again until you
feel some resistance. Do not force!
14
USING THE CHRONOGRAPH
I. M
EASURING A SINGLE SHORT TIME
1. Press pushpiece A to start the chronograph.
Hand 3 shows the measurement in seconds.
2. Stop the measurement by pressing pushpiece A once
more. The measurement is made in hours (totalizer 1),
minutes (totalizer 2), seconds and
(hand 3).
3. Reset the chronograph to zero by pressing pushpiece B.
/ of a second
1
4
15