Control Panel - HP Smart Tank 510 Serie Guía De Referencia

Control panel

1
(Cancel button): Stops the current operation.
2
(Resume button): Resumes a job after a
disruption (for example, after loading paper
or clearing a paper jam).
Resume light: Indicates that you must press
(Resume button) to continue printing after
resolving a printer problem.
3
(Color Copy button): Starts a color copy
job. To increase the number of copies, press
and hold the button. Copying starts two
seconds after the last button press.
4
(Black Copy button): Starts a black-and-
white copy job. See the above for more
details.
5
Ink/Printhead light: Indicates ink tank or
printhead problems.
6
(Color Printhead icon) / (Black Printhead
icon)
7
Control panel display: Indicates number
Printer problems and solutions
Control panel lights indicate printer status and errors.
Note:
For more information, see the user guide on www.support.hp.com.
Display and Lights
The Paper icon ( ), the Alert icon
( ), and the Resume light (
blinking.
2
C M Y
Out of paper
Load paper in the input tray, and then press
continue printing.
) are
K
of copies, paper status, printheads and ink
status or errors, Wi-Fi Direct status, as well as
wireless status and signal strength.
For more information, see the user guide on
www.support.hp.com.
(Wi-Fi Direct icon): Wi-Fi Direct is turned
on when the icon is on.
8
(Wireless button): Turns wireless
capabilities on or off.
Wireless light: Indicates whether the printer
is connected to a wireless network.
A blinking Wireless light indicates that the
printer is not connected to a network or
is trying to connect. During setup, it also
indicates the printer is in setup mode.
9
(Information button): Press this button
to print an information page, which provides
brief information on Wi-Fi Direct, network
connection, and mobile printing.
10
(Power button): Turns the printer on or off.
Cause and Solution
(Resume button) to