RADIO
RADIO RECEPTION
1. Press POWER to on position.
2. Press TUNER source button.
– The TUNER indicator lights up.
3. Adjust BAND to select the desired FM/ AM waveband.
4. Tune to a radio station using the tuning knob.
– For FM, pull out the telescopic antenna. Incline and turn the
antenna. Reduce its length if the signal is too strong (very
close to a transmitter).
– For AM, the set is provided with a built-in antenna so the
telescopic antenna is not needed. Direct the antenna by
turning the whole set.
5. Adjust the sound using VOLUME 4 , 3 and DBB.
6. Press POWER again to switch off the set.
– The TUNER indicator goes out.
DISPLAY INDICATION FOR CD FUNCTIONS
CD door open
d1SC
CD inserted
– In stop mode
total track number and total playback time
– During CD
playback
elapsed playback time of current track and
current track number
– PAUSE
elapsed playback time freezes and flashes
when CD program active;
also appears briefly when you store a track
no SEL
program activated but no tracks selected
program cancelled/ PROG pressed for more
than 2 seconds
no d1SC
no disc/error in CD operation or with the
CD (see Troubleshooting)
FULL
program memory full
– SHUFFLE/ REPEAT
modes
when the respective mode is activated
CD PLAYER
CD
TU NE R
CD
TU NE R
TA PE
PR OG
ST OP
SE AR CH
PL AY /PA US E
BA ND
CD
CD
CD
SHUFFLE
REPEAT
CD
11