Grundig VCC 7070 A Manual De Instrucciones página 21

PREPARATION ____________________________
Notes
Check whether the mains voltage given on
█
the rating plate (on the underside of the appli-
ance) matches the local mains voltage.
Always unplug the appliance from the wall
█
socket before assembling or removing the ac-
cessories.
1­Insert the flexible hose adapter
inlet on the main body of the vacuum cleaner
until it clicks into the locked position. Make
sure that the projecting parts on the flexible
hose are aligned.
C
Note
To remove the flexible hose
release buttons on the flexible hose adapter
and then pull out the hose.
F
2­Insert the end of the handle
telescopic tube .
E
into the
F
, press the side
C
into the metal
A
Note
To adjust the length of the metal telescopic tube
█
, push and hold the height setting switch
E
and slide the tube out or in as required. Release
the height setting switch
the tube clicks into place.
3­Insert the multi-floor brush or accessory into
the lower end of the metal telescopic tube
D
and make sure that
D
.
E
ENGLISH 21