9 SAFETY
To ensure safe operation matters:
If you operate the STE2000IV generator according to the guide, the generator
will run safely. Please read and understand the guide without fail before you
use it, or else casualties or damage of the equipment will
incorrect operation.
The exhaust contains toxic CO. Do not run the generator in dead-air space. Make
sure to provide enough air.
The fuel is very easy to burn or explode under specific conditions. Turn off the
engine before filling.
When filling the engine, keep away from cigarettes or spark. Please fill in a
draught.
Clean the overflowed fuel immediately.
Each time before you start the engine, you must do check it first, avoiding
accidents or damage of the equipment.
The generator must be run at a place at least one meter away from the buildings
or other equipments.
The generator must be run on a horizontal surface. If it leans, the fuel would
spill out.
You must master the knowledge of how to turn off the generator quickly, and
know all the operations of controlling the components. Do never operate the
engine without correct instructions.
Children and pets must be kept away from the operating area.
When the engine is running, everyone must keep away from the circumvolving
parts.
The generator is a latent danger if it is incorrectly operated, so do not operate it
by hand.
Do not operate the generator in the rain or in the snow, preventing wetting it.
9.1
Label position of safety matters
These labels warn you of those latent dangers that will possibly cause serious accidents involving
casualties. Please read carefully the words on the labels, the safety warnings and the notes
recounted in the guide. If the labels have fallen off or are illegible, please contact the ZI-STE2000IV
agent and change them.
1 – Oil level label (Fig. E)
3 – Warning label (Fig. F)
10
OPERATION
10.1 Check before operation
CAUTION: The engine is delivered without oil. Fill up oil before
starting the engine, engine will not start with low oil!
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
ZI-STE2000IV
be caused by
2 – Switch of the engine (Fig. E)
SAFETY
26