Cd/Usb/Ipod/Aux - Pioneer FH-X820BS Manual De Instrucciones

CD/USB/iPod/AUX

Playing back
Disconnect headphones from the device before connecting it to the unit.
(eject) Disc loading slot
M.C. (multi-control) dial
SRC (source)/OFF
CD
1
Insert a disc into the disc loading slot with the label side up.
To eject a disc, stop playback first then press
USB device/iPod
1
Open the USB port cover.
2
Plug in the USB device/iPod using an appropriate cable.
CAUTION
Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected
directly to the unit will protrude out from the unit, which could be dangerous.
Before removing the device, stop playback.
8
En
USB port
AUX input jack (3.5 mm stereo jack)
.
MTP connection
A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using the cable
supplied with the device. However, depending on the connected device and the numbers of the files in
the device, audio files/songs may not be able to be played back via MTP. Note that MTP connection is
not compatible with WAV file formats, and cannot be used with the MIXTRAX function.
AUX
1
Insert the stereo mini plug into the AUX input jack.
2
Press SRC/OFF to select [AUX] as the source.
NOTE
If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source (page 17).
Operations
You can make various adjustments in the FUNCTION settings (page 15).
Note that the following operations do not work for an AUX device. To operate an AUX
device, use the device itself.
Purpose
Select a folder/album*1
Select a track/song (chapter)
Fast forward or reverse
Search for a file from a list
View a list of the files in the selected folder/
category*1
Play a song in the selected folder/
category*1
Operation
Press 1/ or 2/ .
Press or .
Press and hold or .
1 Press
to display the list.
2 Turn the M.C. dial to select the desired
file (folder) name or category, then press
to confirm.
3 Turn the M.C. dial to select the desired
file, then press to confirm.
Playback starts.
Press the M.C. dial when a folder/category
is selected.
Press and hold the M.C. dial when a folder/
category is selected.