Storage; Replacement Parts And Accessories; Repair Service; Battery Recycling - Remington RM0818BPS Manual Del Propietário

Ocultar thumbs Ver también para RM0818BPS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

STORAGE

If storing saw for more than 30 days, follow
steps below.
1.
Remove battery from chain saw.
2.
Charge battery completely. Note: It
could take up to 9 hours to complete-
ly charge the battery.
3.
When battery is completely charged,
remove from charger and put protec-
tive cap on battery terminals.
IMPORTANT: To prolong battery life,
avoid leaving battery on charger for
extended periods of time (over 30
days without use).
4.
Remove and clean guide bar and
chain. Clean guide bar and chain by
soaking in petroleum based solvent
or mild soap and water mixture.
5.
Dry guide bar and chain.
6.
Place chain in container fi lled with
oil. This will prevent rust.
7.
Wipe a thin coating of oil over sur-
face of guide bar.
8.
Wipe off outside of saw body. Do this
with soft cloth dampened with a mild
soap and water mixture.
9.
Store chain saw and battery
• in a high or locked place, out of chil-
dren's reach
• in a dry place
• in a carrying case or with scabbard over
guide bar
REPLACEMENT PARTS
AND ACCESSORIES
WARNING: Use only replace-
ment parts and accessories de-
scribed in this manual. Use of other
parts or accessories could damage
saw or injure operator.
For original replacement parts and acces-
sories, call 1-866-206-2707 (in Canada,
call 1-877-696-5533) or visit
www.remingtonpowertools.com.
REPLACEMENT PARTS
725-05032 (RM18VN)
1. Battery
2. Battery Charger
725-05031
18

REPAIR SERVICE

Note: Only use original replacement parts.
This will protect your warranty coverage for
parts replaced under warranty.
For service, please call the Customer
Support Department to obtain a list of
authorized service dealers near you.
Service on this unit, both within and after
the warranty period, should only be
performed by an authorized and approved
service dealer.
Call 1-866-206-2707 (in Canada call
1-877-696-5533) or visit
www.remingtonpowertools.com.
BATTERY DISPOSAL AND
RECYCLING
This product uses nickel-cadnium bateries.
Local, state, or federal laws may prohibit
disposal of nickel-cadnium batteries in the
ordinary trash.
To help protect the environment and con-
serve natural resources, please dispose of
batteries properly. You may contact your
local recycling center for information on
where to drop off the batteries.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rm0818b

Tabla de contenido