Saneo A019-05KR2 Manual Del Usuario página 30

Aire acondicionado 5000 btu
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Press the
2. Press the
3. Press the
4. Press the
or dehumidifier.
5. Press the
6. Press the
7. Press the
INSTALLATION
It is important that the instructions below are respected to successfully install this
portable air conditioner. If you have any difficulties or questions regarding these
installation procedures, please contact the customer service department.
Before installation:
IMPORTANT – before installing and operating the air conditioner, keep the unit
upright for at least 2 hours.
Installation of the drain pipe
- Insert the drain pipe (the end of the drain joint ) into the ventilation slot on the rear
panel (push to the left, as shown in the diagram below)
button to turn the appliance on or off.
button to set the timer.
button to lower the temperature.
button to choose one of the following functions: cooling, fan
button to increase the temperature.
button to select the wind speed.
button to activate the standby mode.

Publicidad

Tabla de contenido
loading

Productos relacionados para Saneo A019-05KR2

Tabla de contenido