Safety Notes; Technical Data; Symbol Description; Installation Instructions - Hansgrohe Raindance Select S 240 2jet 26470000 Instrucciones De Montaje

Safety Notes

Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
Children as well as adults with physical, mental
and⁄or sensoric impairments must not use this product
without proper supervision. Persons under the influ-
ence of alcohol or drugs are prohibited from using
this product.
Do not allow the streams of the shower touch sensi-
tive body parts (such as your eyes). An adequate
distance must be kept between the shower and you.
The arm of the shower head is intended only to hold
the shower head. Do not load it down with other
objects!

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• During installation of the product by qualified trained
personnel, make sure that the entire fastening surface
is even and smooth (no protruding seams or tile
offset), that the finish of the wall is suitable to apply the
product and has no weak points.
Wall mount (see page 31)
Ceiling mount (see page 33)
4
English

Technical Data

Operating pressure:
Recommended operating pressure:
Hot water temperature:
Thermal disinfection:
The product is exclusively designed for drinking water!

Symbol description

Do not use silicone containing acetic acid!
Dimensions (see page 36)

Flow diagram

(see page 36)


Operation (see page 44)
Cleaning (see page 38)
Spare parts (see page 40)
Test certificate (see page 44)
(1 MPa = 10 bar = 147 PSI)
max. 70°C ⁄ 4 min
Rain
RainAir
max. 1 MPa
0,15 - 0,4 MPa
max. 60°C