Using Smart Diagnosis - LG WD22VVS6 Manual Del Propietário

Using Smart Diagnosis™

Smart Diagnosis™ Through the
Customer Information Centre
Use this function if you need an accurate diagnosis by
an LG Electronics customer information center when the
appliance malfunctions or fails. Use this function only
to contact the service representative, not during normal
operation.
1
Press the Encendido/Apagado button to turn
on the washing machine. Do not press any other
buttons or turn the cycle selector knob.
2
When instructed to do so by the call centre,
place the mouthpiece of your phone close to the
Encendido/Apagado button.
3
Press and hold the Temp. Lavado button for 3
seconds, while holding the phone mouthpiece to
the icon or Encendido/Apagado button.
4
Keep the phone in place until the tone transmission
has finished. Time remaining for data transfer is
displayed.
• For best results, do not move the phone while
the tones are being transmitted.
• If the call centre agent is not able to get an
accurate recording of the data, you may be
asked to try again.
5
Once the countdown is over and the tones have
stopped, resume your conversation with the call
centre agent, who will then be able to assist you
using the information transmitted for analysis.
36
NOTE
• The Smart Diagnosis™ function depends on the
local call quality.
• The communication performance will improve and
you can receive better service if you use the home
phone.
• If the Smart Diagnosis™ data transfer is poor due
to poor call quality, you may not receive the best
Smart Diagnosis™ service.