Foscam FI8903W Guía De Instalación Rápida página 24

If you are still unable to see a live video, try shutting down any firewall or anti-virus software on your
computer.
4. Wireless Connection Settings
Step 01) Please choose "For Administrator" and click "Wireless LAN Settings". Then enable
"Using Wireless LAN".
Click the Scan button and the camera will detect all WIFI devices around the area. It should also
display your router in the list. (Figure 1.9)
If the camera is not able to detect any WIFI device, please click the Scan button again. Make sure
to wait 1 to 2 minutes before selecting the Scan button again.
Step 02) Click the SSID of your router in the list, the corresponding information (SSID & Encryption)
will be filled in the following boxes automatically.
You will only need to fill in the share key. Make sure that SSID, Encryption and share key you filled
in for the camera are exactly the same for your router
Step 03) Please click on the Submit button after all settings have been entered. The camera will
reboot after the camera has completed the reboot process, wait 10 seconds and disconnect the
www.foscam.com
Figure 1.9 Wireless LAN Settings
Figure 2.0 Wireless LAN Settings
FI8903W/04W/05W Quick Installation Guide
.
- 23 -