Foscam FI8903W Guía De Instalación Rápida página 26

FI8903W/04W/05W Quick Installation Guide
Note
Make sure port mapping (or also known as port forwarding) is successful. You can do port
mapping in two ways.
1) Enter the setting page of the router to enable UPNP function. Then login the camera as
administrator, choose UPnP Settings to enable UPNP and make sure the state is "UPnP success".
2) Do port forwarding manually. (details: Fig.2.3)
If your router has a Virtual Server, it will do port mapping. Please add the camera's LAN IP and port
which you set in basic network settings to the Virtual map list.
Note:
If you plug the camera in a router, it will have dynamic IP address and you need to set DDNS
service settings to view it remotely.
5.2 How to configure Remote Access Settings (For dynamic IP user)
① Step 1, Go to the website www.dyndns.com to create a free hostname
Login on www.dyndns.com and click 'get a free domain service', and click Sign up free. Create a
hostname, a user name and password which are used to DDNS Service Settings within the
camera.
Please apply the account step by step according to instructions on www.dyndns.com
Figure 2.2 Register a user name on www.dyndns.com
② Step 2, DO DDNS Service Settings within the Camera
Please set DDNS Service Settings within the camera by hostname, a user name and password
you've got from www.dyndns.com
Take hostname foscam.dyndns.org, user name foscam, password foscam2012 for example.
www.foscam.com
- 25 -