Changing The Language Setting - Sony HANDYCAM HDR-CX190 Guía De Operaciónes

Changing the language setting

You can change the on-screen displays to show messages in a specified language.
 [Setup]  [
Select
To turn off the power
Close the LCD screen.
To adjust the angle of the LCD panel
First open the LCD panel 90 degrees to the
camcorder (), and then adjust the angle
().
To turn off the beep sound
 [Setup]  [
Select
Notes
The recording date, time and condition are recorded automatically on the recording media. They are not

displayed during recording. However, you can check them as [Data Code] during playback. To display
 [Setup]  [
them, select

To set the date and time again: [Date & Time Setting] (p. 63)

To calibrate the touch panel: [Calibration] (HDR-CX200/CX210/PJ200) (p. 72)

General Settings]  [Language Setting]  a desired language.
 90 degrees (max.)
 180 degrees (max.)
General Settings]  [
Playback Settings]  [Data Code]  [Date/Time].
 90 degrees to the camcorder
]  [Off].
Beep
US