Thermador Masterpiece HMCB30WS Guía De Uso Y Cuidado página 14

Connecting your hood to another Home
Connect account
™
A. Open general settings on your mobile device and then
open Wi-Fi settings. Connect to the same home
network (Wi-Fi) as the hood.
B. Press and hold the "CONNECT" button until the
"CONNECT" and 3 buttons start flashing.
C. Open the app on your mobile device and follow the
instructions.
D. The registration process is complete once "CONNECT"
stops flashing on the hood.
If you want to change the wireless home network that
is connected to the hood, reset the connection to your
hood by:
A. Press and hold the "CONNECT" and fan setting "0"
buttons on your hood for at least 3 seconds. The
"CONNECT" button will turn off.
B. Repeat the process from step 2.
Software update
Using the software update function, your hood's software
can be updated (e.g. for the purpose of optimization,
troubleshooting or security updates). To do this, you need
to be a registered Home Connect™ user, have installed the
app on your mobile device and be connected to the Home
Connect™ server.
As soon as a software update is available, you will be infor-
med through the Home Connect™ app and will be able to
start the software update via the app.
Once the update has been successfully downloaded, you
can start installing it via the Home Connect™ app if you are
on your local area network.
The Home Connect™ app will inform you once installation
is complete.
Notes
• You can continue to use your hood as normal while
updates are downloading.
• Depending on your personal settings in the app,
software updates can also be set to download
automatically.
• We recommend that you install security updates as
soon as possible.
English | 14 |
Resetting the connection
You can reset the connections you have saved on your
home network and on Home Connect™ at any time.
• Press and hold the 0 and CONNECT buttons at the
same time until the CONNECT symbol is no longer
illuminated.
About Data Protection
When your appliance is connected for the first time to a
WLAN network, which is connected to the Internet, your
appliance transmits the following categories of data to the
Home Connect™ server (initial registration):
• Unique appliance identification (consisting of appliance
codes as well as the MAC address of the installed Wi-Fi
communication module).
• Security certificate of the Wi-Fi communication module
(to ensure a secure IT connection).
• The current software and hardware version of your
domestic appliance.
• Status of any previous resetting to factory settings.
This initial registration prepares the Home Connect™
functions for use and is only required when you want to use
these Home Connect™ functions for the first time.
NOTE: Ensure that the Home Connect™ functions can be
used only in conjunction with the Home Connect™ app.
Information on data protection can be accessed in the
Home Connect™ app.
Use and Care Guide