Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation for Monitor Unit
Screw (M4X8)
(commercially available)
Self-tapping screw
(commercially available)
Make sure that the unit is installed securely in place. If the unit is unstable,
it may malfunction (eg, the sound may skip).
Installation for Receiver unit
1. Attach the installation brackets 9 to the sides of
the hideaway unit using the sems bolts 7.
2. Use the tapping screw 8 to secure the hideaway
unit to the audio board.
Firewall or metal support
Metal mounting strap
(commercially available)
Sems bolts (M4 × 8 mm)
(Accessory 7)
Bend the tabs of the mounting
sleeve with a screwdriver or similar
utensil and attach it in place.
Accessory 5
Installation brackets
(Accessory 9)
Tapping screw (ø4 × 16 mm)
(Accessory 8)
7
|
English
Publicidad
Tabla de contenido
