SeCTION 3
After filling the reservoir to the MAX mark, located on the front panel, run the pump with its cap removed in
order to purge air from the radiator, hoses, and torch. Re-check coolant level to ensure reservoir is filled to MAX
mark. Replace reservoir cap after purging and checking coolant level.
WArNINg
DO NOT CONNeCT hOSeS TO A SOleNOID VAlVe ThAT CAN Be
ClOSeD WheN The PuMP IS OPerATINg AS DAMAge TO PuMP CAN
reSulT.
23
INSTAllATION