Panasonic CS-UZ9SKE Instrucciones De Funcionamiento página 2

Quick guide
2
Inserting the batteries
1 Pull out the back cover of remote control
2 Insert AAA or R03 batteries
(can be used ~ 1 year)
3 Close the cover
Clock setting
1 Press CLOCK
2 Set the time
3 Confi rm
Basic operation
1 Select the desired mode
AUTO HEAT
DRY COOL
2 Start/stop the operation
• Please note that the
display to start the unit.
3 Select the desired temperature
• Selection range:
16 °C ~ 30 °C.
• Operating the unit within the recommended
temperature range may save energy.
HEAT : 20 °C ~ 24 °C.
COOL: 26 °C ~ 28 °C.
DRY: 1 °C ~ 2 °C lower than room temperature.
• To dim or restore the unit's indicator brightness,
press and hold for 5 seconds.
• Use remote control within 8 m from the remote
control receiver of the indoor unit.
The illustrations in this manual are for explanation
purposes only and may differ from the actual unit.
They are subject to change without notice for future
improvement.
POWER
indication is on