Technical Features; Disposal Of Device - FLAEM Ghibli Plus Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35

TECHNICAL FEATURES

Mod. P0211EM F400
Voltage:
Safety certifications:
Max pressure:
Compressor air output:
Sound level (at 1 m):
Operation:
Operating conditions:
Temperature:
RH Air humidity:
Atmospheric pressure:
Storage conditions:
Temperature:
RH Air humidity:
Atmospheric pressure:
Dimensions (W)x(D)x(H):
Weight:
APPLIED PARTS
Type BF applied parts are:
2
RF6 Basic
nebuliser
Medication minimum capacity:
Medication maximum capacity:
Operating pressure (with neb.):
(2)
MMAD (μm)
Standard
High speed
mode
mode
3.8
4.0
(1) Data detected according to Flaem I29-P07.5 internal procedure. (2) In vitro characterization carried out at the
Inamed Research GmbH & Co. KG on behalf of TÜV Rheinland Product Safety GmbH – Germany in compliance
with the European Standard for aerosol therapy appliances, Standard EN 13544-1. Further details are available
upon request.

DISPOSAL OF DEVICE:

In conformity with Directive 2012/19/EC, the symbol shown on the device to
be disposed of indicates that it is considered as waste and is therefore subject
to "sorted waste collection". The user must therefore take (or have taken)
the above waste to a pre-sorted waste collection centre set up by the local
authorities, or else give it back to the dealer when purchasing a new appliance of the
same type. Pre-sorted waste collection and the subsequent treatment, recovery and
disposal operations favor the production of appliances made of recycled materials
and Iimit the negative effects of any incorrect waste management on the environment
and public health. The unlawful disposal of the product by the user could result in
administrative fines as provided by the laws transposing Directive 2012/19/EC of the
European member state or of the country in which the product is disposed of.
230V~ 50Hz 130VA
1.8 ± 0.3 bar
9 l/min approx
54 dB (A) approx
Continuous
min 10°C; max 40°C
min 10%; max 95%
min 69KPa; max 106KPa
min -25°C; max 70°C
min 10%; max 95%
min 69KPa; max 106KPa
13.5x15.5x11 cm
1.100 Kg
patient accessories (C2, C3, C4)
2 ml
8 ml
0.6 bar
BREATHABLE FRACTION
< 5 μm (FPF)
Standard
High speed
mode
62%
8
115V ~ 60Hz
DELIVERY ml/min
(2)
(approx)
Standard
mode
mode
63%
0.25
220V ~ 60Hz
(1)
High speed
mode
0.32

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

P0211em f400

Tabla de contenido