Electromagnetic Compatibility - FLAEM Ghibli Plus Manual De Instrucciones

SYMBOLS
CE Medical Marking ref. Dir.
93/42 EEC and subsequent
amendments
Class II device
Important: check the operating
instructions
Switch
"ON"
Switch
"OFF"
Complies with: European
standard EN 10993-1
"Biological Evaluation of
Medical Devices" and European
Directive 93/42/EEC "Medical
Devices". Phthalates free. In
conformity with Reg. (EC) no.
1907/2006
Minimum and maximum room
temperature
Minimum and maximum
atmospheric pressure

ELECTROMAGNETIC COMPATIBILITY

This device was designed to satisfy the currently required requisites for
electromagnetic compatibility (EN 60601-1-2). Electro-medical devices require
particular care during installation and use relative to EMC requirements. Users are
therefore requested to install and/or use these devices following the manufacturer's
specifications. There is a risk of potential electromagnetic interference with other
devices. RF mobile or portable radio and telecommunications devices (mobile
telephones or wireless connections) can interfere with the functioning of electro-
medical devices. For further information visit our website www.flaemnuova.it. The
Device may be subject to electromagnetic interference if other devices are used
for specific diagnosis or treatments. Flaem reserves the right to make technical and
functional modifications to the product with no prior warning.
When you shut off the
device, the switch will
interrupt the compres-
sor function only on
one of the two power
phases
Certification TÜV
Serial number of device
Manufacturer
Type BF applied part
Alternating current
Enclosure protection rating: IP21.
(Protected against solid bodies over
IP21
12 mm. Protected against access with
a finger;
Protected against vertically falling
water drops.)
Minimum and maximum air moisture
7