Electromagnetic Compatibility - FLAEM MasterNeb Manual De Instrucciones

SYMBOLS
CE Medical Marking ref. Dir. 93/42
EEC and subsequent amend-
ments
Class II device
Important: check the operating
instructions
"OFF" for part of equipment
"ON" for part of equipment
Complies with: European
standard EN 10993-1 "Biological
Evaluation of Medical Devices"
and European Directive 93/42/
EEC "Medical Devices". Phthalates
free. In conformity with Reg. (EC)
no. 1907/2006
Minimum and maximum room
temperature
Minimum and maximum
atmospheric pressure

ELECTROMAGNETIC COMPATIBILITY

This device was designed to satisfy the currently required requisites for
electromagnetic compatibility (EN 60601-1-2). Electro-medical devices require
particular care during installation and use relative to EMC requirements. Users are
therefore requested to install and/or use these devices following the manufacturer's
specifications. Risk of potential electromagnetic interference with other devices.
Mobile or portable RF radio and telecommunication devices (mobile phones or
wireless connections) may interfere with the operation of medical devices. For more
information, visit the website www.flaemnuova.it. The appliance may be susceptible
to electromagnetic interference in the presence of other devices used for specific
diagnoses or treatments. Flaem reserves the right to make technical and functional
changes to the product without prior notice.
Certification TÜV
Serial number of device
Manufacturer
Type BF applied part
Alternating current
Enclosure protection rating: IP21.
(Protected against solid bodies over
IP21
12 mm. Protected against access
with a finger;
Protected against vertically falling
water drops).
Minimum and maximum air moisture
7