Trix E 41 Serie Manual De Instrucciones página 5

Function
• This model is designed for operation with H0 2-rail DC
systems (track according to NEM standards) with con-
ventional DC power packs.
• This locomotive comes equipped with a Trix connector for
digital operation and can have the Trix locomotive decoder
installed in it.
• Headlights change over with the direction of travel and vary in
brightness according to the voltage present in the track.
The necessary maintenance that will comes due with normal
operation is described below. Please see your authorized Trix
dealer for repairs or spare parts.
Safety Information
• Please make note of the safety information in the instructions
for your operating system.
• Trix motor vehicles must not be operated on digital systems
without an in-built engine decoder (Motor can be damaged!).
• The feeder track must be equipped to prevent interference
with radio and television reception, when the locomotive is
to be run in conventional operation. The 611 655 interference
suppression set is to be used for this purpose.
The interference suppression set is not suitable for digital
operation.
No warranty or damage claims shall be accepted in those cases where
parts neither manufactured nor approved by Trix have been installed in
Trix products or where Trix products have been converted in such a way
that the non-Trix parts or the conversion were causal to the defects and /
or damage arising. The burden of presenting evidence and the burden of
proof thereof, that the installation of non-Trix parts or the conversion in or
of Trix products was not causal to the defects and / or damage arising, is
borne by the person and/or company responsible for the installation and /
or conversion, or by the customer.
WARNING! This product contains magnets. Swallowing more than one
magnet may cause death in certain circumstances. If necessary, see a
doctor immediately.
5