Start-Up Operation - Soehnle FIRENZE Manual Del Usuario

• Do not modify the device in
EN
any way. Have repairs to the
device or the power supply unit
performed only by an autho­
rized repair shop or service
centre.
• Place the device only on a
solid, level, and moisture­resis­
tant surface.
• Do not cover the device ­ parti­
cularly the ventilation ope­
nings.
• It cannot be completely exclu­
ded that some varnishes, plas­
tics, or furniture care products
may deteriorate and soften the
material of the non­slip feet.
Therefore please place a non­
slip pad underneath the device
if required.
• Do not place the device directly
underneath a shelf or a wall
unit; the water vapour could
damage such.
• Aromas containing oil (e.g.
eucalyptus oil) must not be
used as these may damage the
device. Use only water­soluble
aromas.
• Do not transport the device
with a filled water tank.
• Do not operate the device if it
contains very little or no liquid.
6
052_Firenze_8197-B_Content_27-07-2014.indd 6
A. Start-up Operation
Fill the device only while the
power supply unit is disconnec­
ted!
1. Remove the upper part.
2. Fill with distilled water up to
the maximum water level indi­
cator (100 ml).
3. Add 1 to 2 drops SOEHNLE
fragrance oil.
4. Reattach upper part correctly.
5. Connect power supply unit.
6. Place on a level surface.
7. Switch on. The switch is loca­
ted in one of the feet. Place
hand on the device and press
in the direction of the switch.
Illumination
1. After switching the device on
it will be illuminated in alter­
nating colors.
2. Push again to stop at the cur­
rent color.
3. Push again to switch illumina­
tion off.
4. Push again to switch device
off.
28.07.2014 17:09:3