Turning The Unit Off - HAEGER 1-N5-H Instrucciones De Uso

English
Flame adjusting
The flame of each burner can be adjusted according to he symbols
contained in each handle.
 To adjust the flame, turn the gas control knob suitable position between
ON and OFF.
 The flame can easily be adjusted to any degree from HIGH to LOW by
adjusting the knob to desired position in one action.
If visually check the existence of yellow flame or displacement flame, set the
air damper.
Correct flame adjustment
After the gas has been ignited, adjust the air damper inside the gas table until slightly rounded. Vigorous blue flames
are produced.

Turning the unit off

 Turn the ignition knob to its original position without pressing it.
 Do not fall to completely turn of the stopcock of the gas cylinder after use.
6