Disposal And Recycling - EINHELL 41.327.41 Manual De Instrucciones Original

connected as described above.
p-
5. Instructions for the 3-piece
accessory set
For information on the correct use of the accesso-
ries, please refer to the following overview.
r
5.1 Compressed air hose
l
For connecting to a compressed air source.
5.2 Blow-out pistol (Figure 1)
Working pressure in bar:
e
ic
Range of applications:
r of
For cleaning and blowing out hollow spaces or
hard-to-reach areas, as well as for cleaning soiled
equipment.
The infi nitely variable trigger lever allows an exact
dosing of compressed air.
5.3 Tire pressure gauge (Figure 2)
Working pressure in bar:
-
Range of applications:
e
The tire pressure gauge allows you to infl ate tires
nju-
easily and exactly. Use the pressure gauge to
check the tire pressure. If the tire pressure is too
high, you can reduce the pressure with the integ-
de-
rated relief valve ().
al
Warning! Observe the information supplied
rial
by the tire manufacturer and the vehicle
manufacturer relating to the recommended tire
pressure.
Warning! This equipment is not calibrated! For a
calibrated measurement value, check the actual
tire pressure using a calibrated meter after you
have infl ated the tires yourself, e.g. at a petrol
station.
nto
- 6. Cleaning, maintenance and
ordering of spare parts
6.1 Cleaning
•
We recommend that you clean the appliance
g,
immediately after you use it.
o
•
Clean the accessories after use with a suitab-
le cleaning agent (observe the instructions on
the working materials).
e
Anl_DL_Werkzeugset_SPK9.indb 11 Anl_DL_Werkzeugset_SPK9.indb 11
GB
6.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
6.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
3-8

7. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
0-8
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
8. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the iSC GmbH.
Subject to technical changes
- 11 -
04.01.2019 07:16:05 04.01.2019 07:16:05