ESYLUX PD-C360i/24 DIMplus WH Manual De Instrucciones página 18

Fade-out time for orientation light
Once the orientation light value has been set, set the
time for the afterglow feature.
GB
orientation light "oFF"
Switch between fully automatic and semi-automatic mode for
light channel C1
For semi-automatic mode, the blue LED turns off for
approximately 2 seconds.
For fully automatic mode, the blue LED flashes 3 times.
Switch between fully automatic and semi-automatic mode for
HVAC channel C2
For semi-automatic mode, the blue LED turns off for
approximately 2 seconds.
For fully automatic mode, the blue LED flashes 3 times.
ECo semi-automatic mode for light channel C1
Press the "C1" button, followed by "A/M" (regardless of
the original status). The "100 Lux" button must then be
pressed within 2 seconds. The green LED will flash once.
Corridor semi-automatic mode for light channel C1
Press the "C1" button, followed by "A/M" (regardless of
the original status). The "200 Lux" button must then be
pressed within 2 seconds. The red LED will flash once.
18
Switch LEDs oN/oFF (red/green LED)
To switch LEDs off = press button, the blue LED will
turn off for approximately 2 seconds.
To switch LEDs on = press button, the blue LED will
flash 3 times.
Restore factory settings
Confirmed by brief alternate flashing of the blue and
red LEDs on the detector.