Putting into operation
Check sieve for damages.
Do not operate high pressure without or with a damaged sieve.
Be careful when using hot water!
When running your high pressure cleaner with hot water of 60° C raised
temperatures occur. Do not touch the metal parts of the cleaner without
safety gloves!
42
9. Check water inlet filter for cleanliness
prior to putting the machine into
operation. When inside filter is
contaminated, remove filter and
follow step 9.1.
9.1 If contaminated, remove sieve and
thoroughly rinse and clean with the
rest of the parts in clear water.
10. Connect water hose to water inlet. The
cleaner may be connected to a water mains
(1-10 bar pre-pressure) with either cold or hot
water
(up to 60°C).