Small Repairs - Do It Yourself - Kränzle K 1050 TS Manual De Instrucciones Original

Small repairs - do it yourself!

Problem:
No water from nozzle although pump is running.
Cause:
Most likely the nozzle is blocked.
Pull plug from socket prior to starting any repair work!
No or very little water from the lance.
Proceeding:
Switch off the high pressure cleaner. Pull
plug from the socket. Operate trigger
gun with safety catch several times to
decrease the pressure.
Unscrew trigger gun and lance first,
then rinse high pressure gun to remove
possible soiling.
Check water inlet filter for soiling.
If the problem still exists, take wire (paper
clip) and push through nozzle opening.
If cleaning by means of a wire is not
successful, replace lance.
GB
45