Before You Begin - Kohler K-1014 Guia De Instalacion

Bañera de hidromasaje de sobreponer
Ocultar thumbs Ver también para K-1014:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Before You Begin

NOTICE: Do not lift the whirlpool by the piping or pump, or use the piping or pump for structural
support of the whirlpool. To avoid damage to the whirlpool, lift at the sides of the whirlpool.
NOTICE: Do not support the load weight of the whirlpool by the perimeter of the rim. To avoid damage
to the product, support the whirlpool by its base or feet.
We recommend this whirlpool for drop-in or alcove installation.
Inspect the whirlpool for damage before you begin installation.
You must install this whirlpool to an adequately supported, level subfloor.
If an optional apron will be used: construct the required additional support and install the optional
apron before the finished floor and wall materials are completed. Refer to the installation
instructions packed with the apron.
Confirm adequate support for a rim-mounted faucet; large faucets that may be inadvertently used
as a means of support are not appropriate or safe for this installation.
Kohler Co. reserves the right to make revisions in the design of products without notice, as specified
in the Price Book.
1019749-2-M
4
Kohler Co.

Publicidad

Tabla de contenido
loading

Tabla de contenido