Hkoenig V32 Manual De Utilización página 7

How to get a professional ironing finish
A normal iron generates only a small quantity of steam. In this case it is necessary to products
steam constantly in order to eliminate crease in the fabric being ironed.
A professional ironing system works rather differently. The fabric is first made damp by the steam
and then, in a second phase, dry-ironed in the normal way. This means that every. Tiniest crease
is removed and your garments are ironed to perfection.
In the first phase (steam-damping of the fabric),hold the iron about 20 cm above the fabric and
press the steam(2). Pass the iron over the garment in a circular movement so that the powerful jet
of steam damps the fabric. Lightly creased garments require only a few moments of steaming.
While very heavy fabrics or garments with particularly difficult creases must be damper, so steam
must be applied for a few seconds more.
During the second phase (dry ironing), check that the thermostat knob is in the correct position
for the type of fabrics; dry-iron the garment. The special ironing plate will prevent the fabrics from
becoming shiny. Using this ironing technique, and following the suggestions in the chart below,
you will find it easy to give your garments a really professional ironing finish.
Type of
fabric
Acetate
Acrylic
Nylon
Pollester
Rayon
Silk
Wool
Light cotton
Light linen
Cotton
Fine linen
Starched
fabrics
Linen
ENVIRONMENT
CAUTION:
Do not dispose of this product as it has with other household products. There is a separation of this waste
product into communities, you will need to inform your local authorities about the places where you can
return this product. In fact, electrical and electronic products contain hazardous substances that have harmful
effects on the environment or human health and should be recycled. The symbol here indicates that electrical and
electronic equipment should be chosen carefully, a wheeled waste container is marked with a cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 05
Guide to perfect ironing
Position of
thermostat Ironing instructions
knob
Dry ironing
Follow the instructions on the label of the garment.
l
This type of fabric generally requires very light ironing.
Dry ironing
Iron inside out. When ironing mixed fabrics. Select the
l
Lowest recommended temperature.
Dry ironing
l
Iron inside out.
l
Steam ironing
l
Iron inside out. Place a thin cloth over the fabric in order to
l
avoid a shiny finish
Steam ironing
l
Dampen the fabric before ironing. Heavier fabrics and
l
tarched fabrics can be ironed on the front; darker colours
l
and embroidered garments should be ironed inside out.
Steam ironing
l
Use plenty of steam and iron dark fabrics inside out in order
l
to avoid a shiny finish, Iron lapels and cuffs on the right side
l
for better finish.