Loading The Racks - Franke FDW 614 D10P DOS C Manual De Usuario

LOADING THE RACKS

UPPER RACK
(loading example for the upper rack)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper basket can be adjusted: high position to place
bulky crockery in the lower basket and low position to make the most
of the tip-up compartments by creating more space upwards.
The upper rack is equipped with a Upper Rack
height adjuster (see figure), without pressing
the levers, lift it up by simply holding the rack
sides, as soon as the rack is stable in its upper
position. To restore to the lower position, press
the levers (A) at the sides of the rack and move
the basket downwards.
We strongly recommend that you do not
adjust the height of the rack when it is
loaded.
NEVER raise or lower the basket on one side only.
LOWER RACK
For pots, lids, plates, salad bowls, cutlery etc... Large plates and lids
should ideally be placed at the sides to avoid interferences with
the spray arm.
The lower rack has tip-up supports which can be used in a vertical
position when arranging plates or in a horizontal position (lower)
to load pans and salad bowls easily.
(loading example for the lower rack)
8
Load delicate and light dishes:
glasses, cups, saucers, low salad
bowls.
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable flaps can be fold or unfold to optimize
the arrangement of crockery inside the rack.
Wine glasses can be placed safely
in the foldable flaps by inserting
the stem of each glass into
the corresponding slots.
Depending on the model:
– to unfold the flaps there is
needed to slide it up and rotate
or release it from the snaps
and pull it down.
– to fold the flaps there is needed
to rotate it and slide flaps down
or pull it up and attach flaps
to the snaps.
CUTLERY BASKET
The basket is equipped with top grilles
for improved cutlery arrangement.
The cutlery basket should be
positioned only at the front
of the lower rack.
Knives and other utensils with
sharp edges must be placed
in the cutlery basket with the points
facing downwards or they must be
positioned horizontally in the tip-
up compartments on the upper rack.