Adding Rinse Aid To The Dispenser - LG LDF7932WW Guía De Usuario

Ocultar thumbs Ver también para LDF7932WW:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ADDING RINSE AID TO THE DISPENSER

The use of rinse aid products is recommended to
prevent spots on dishes from water droplets
remaining after the completion of the wash cycle,
and to enhance the performance of the dry cycle.
NOTE: Only use liquid rinse aid in this
dishwasher.
2
Add a liquid rinse aid to the maximum fill
level (max. 4.8 oz [145 ml]).
RINSE AID DISPENSER ADJUSTMENT
The rinse aid dispenser is factory-set to level 3,
Rinse Aid Indicator Eye
Adjustment Lever
the control too high can cause foaming, which
will cause poor wash performance.
To adjust the rinse aid dispenser setting, remove
the cap and adjust the rinse aid lever to the
desired setting.
O P E R AT I N G I N S T RU C T I O N S
which should provide
the best performance
under most conditions.
Setting the rinse aid
control too low will
contribute to spotting
and streaking of dishes
and poor drying
performance. Setting
1
Rotate the round cap counterclockwise to
remove it.
3
Replace the cap and turn clockwise to lock.
Rinse aid will be dispensed automatically
during the final rinse cycle.
REFILLING THE RINSE AID
The capacity of the rinse aid dispenser is 4.8 oz
(145 ml). How often the dispenser will need to be
refilled depends on how often dishes are washed
and the rinse aid setting used.
If the rinse aid level is low, the Rinse Aid light on
the control panel will illuminate.
NOTE :
The dispenser also has a round Rinse Aid
Indicator Eye that is dark when the dispenser
is full and light when it is empty.
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ldf7932bbLdf7932st

Tabla de contenido