Mounting On A Table - LG 26LT670H Guía De Referencia Rápida

20
ASSEMBLING AND PREPARING

Mounting on a Table

1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (4 inchese) (minimum) space
from the wall for proper ventilation.
10 cm
2
Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources
y y
of heat, as this may result in fire or other
damage.
Adjusting the angle of the TV to suit view
(For 26/32/37/42LT670H, 32/37/42/47LT770H,
26LT673H)
Swivel 90 degrees to the left or right and adjust
the angle of the TV to suit your view.
90˚
10 cm
1 0 c m
10 cm
90˚
(For 32/37/42/47LT777H)
The swivel angle is adjustable. The default swivel
angle is 20°. Attaching a screw to the A position
on the bottom of the stand will allow a swivel
angle range of 45°. Attaching a screw to the B
position will allow a swivel angle range of 90°.
20˚
C
NOTE
Only one swivel screw is included and
y y
attached to position C.
CAUTION
When adjusting the angle of the TV, watch
y y
out for your fingers.
- Personal injury may occur if hands or
fingers are pinched. If the product is tilted
too much, it may fall, causing damage or
injury.
Removing the swivel fixing screw will allow
y y
the set to rotate 360°.
20˚
A
B